Construction with Concrete: Building a Stronger Home Foundation

constructionEvery house foundation is important. It’s not only meant to hold the structure above ground, it should also keep any moisture out, as well as hold off the cold. A strong foundation should last. So what makes a foundation strong?

Soil Conditions

It all starts with the area where you build the structure. When it comes to building foundations, the soil is an important component. Investigate soil conditions before beginning construction.

There are soil types that are not strong and will require special foundations to ensure they hold up. Often, problems in building structures are from the foundation, but it takes time to notice because it’s underneath.

Consider water tables as well as the quality of backfill. You’re ready to begin if all these components meet the standards to make a solid foundation.

Pour in One Go

Concrete is the main material of foundations. Companies offering construction services in Salt Lake City say the most important thing when pouring concrete is to do it in one go for a section. Stopping and continuing to fill the foundation the following day is a big no-no.

You want to avoid “cold joints,” which form between fresh concrete and the one previously poured. This opens the foundation for cracks and leaks.

Don’t pour from a height over three or four feet to avoid segregation. Spread concrete evenly to remove trapped air.

Concrete Curing

After pouring the concrete, it will undergo the process of curing. It usually takes 28 days to reach the full design strength. In the meantime, make sure the concrete doesn’t get too hot (above 80 degrees) or too cold (below freezing temperature).

READ  How to Cancel Your Car's Registration in Christchurch

Keep it damp or moist for at least three days. It will set in about a week.

Working with a good contractor will help ensure you get the solid foundation your house needs. Remember, foundations should hold your home upright.